|
|
||||||
|
|
This dryer provides an efficient, economical and easy to maintain method of drying compressed air and gases. The drying medium (Silica gel or Activated Alumina ) is contained in two carbon steel pressure vessels. While chamber I is drying, air is passed over an electrical heater embedded in chamber II and carries out the desorbed moisture of this chamber. This type of system utilizes about 2-3% of the gas as a purge. It is an ideal system for gases requiring ultra low drying like dew points upto (-80°C). Each column remains in line for about 6 hours. For regeneration, the desiccant is heated for about 3 hours and then cooled for another 3 hours before changeover. The operation is fully automatic.
MODEL
NO. |
CAPACITY |
PIPE LINE
SIZE mm |
POWER
CONSUMPTION KWH / DAY/ |
APROX.
OVERRALL DIMENSIONS | |||
M³/ HR |
CFM |
LENGHT mm |
WIDTH mm |
HEIGHT mm | |||
IHR-01 |
80.5 |
50 |
25 |
14.40 |
1400 |
1400 |
1800 |
IHR-02 |
122.7 |
75 |
25 |
21.60 |
1500 |
1500 |
2000 |
IHR-03 |
163.0 |
100 |
25 |
32.4 |
1500 |
1500 |
2000 |
IHR-04 |
244.5 |
150 |
25 |
43.2 |
1600 |
1600 |
2000 |
IHR-05 |
326.0 |
200 |
40 |
64.0 |
1700 |
1700 |
2200 |
IHR-06 |
489.0 |
300 |
40 |
86.4 |
1800 |
1800 |
2400 |
IHR-07 |
652.0 |
400 |
50 |
110.0 |
2000 |
2000 |
2600 |
IHR-08 |
815.0 |
500 |
50 |
129.6 |
2200 |
2200 |
2600 |
IHR-09 |
978.0 |
600 |
50 |
172.8 |
2300 |
2300 |
2800 |
IHR-10 |
1222.0 |
750 |
65 |
194.4 |
2400 |
2400 |
2800 |
IHR-11 |
1630.0 |
1000 |
65 |
259.2 |
2500 |
2500 |
3200 |
IHR-12 |
2037.0 |
1250 |
80 |
302.4 |
2600 |
2600 |
3400 |
IHR-13 |
2445.0 |
1500 |
80 |
388.80 |
2800 |
2800 |
3400 |
IHR-14 |
3260.0 |
2000 |
100 |
518.4 |
2900 |
2900 |
3600 |
IHR-15 |
4075.0 |
2500 |
100 |
604.80 |
3000 |
3000 |
4000 |
The above capacities are rated at an inlet temp. of 40°C., 7kg/ Cm2 Pr. and at an outlet dew point of (-) 40°C. at Atm. Pressure, Supply Voltage of 220 V-1 PH- 50 HZ or 415V-3PH-50 Hz.
Above data is only for estimation and can be changed without notice. For special systems and higher capacities contact us.For cost comparison of operating of a Heat of Compression Type Air Dryers Vs. Heated Type/Heatless/Refrigerated Type Air Dryers please clickhere.
| OUR PRODUCT RANGES | |||
| PSA Nitrogen Generator (New !!!) | |||
| Air / Gas Dryers | |||
| Heatless Air Dryer | Refrigerated Air Dryer | ||
| Custom Made Air Dryer | High Pressure Air/Gas Dryer | ||
| Blower Heat Regenerated Air Dryer (BHR) | Internal Heater Dryer (IHR) | ||
| Heat of Compression Air Dryer (HOC) | Split Flow-No Purge Loss Air Dryer (SFNL) | ||
| Chillers | |||
| Air Cooled Water Chiller upto30Tr | Water Cooled Chiller up to 150Tr | ||
| Packaged Dry Air Plants | Liquid CO2 Storage Tanks | ||
| Packaged Dry Air Plant | Liquid CO2 Storage Tank | ||
| Refrigerants | |||
| Recovery System | |||
| Other Products | |||
| Auto Drain Trap | Air Receiver | Liquid Dryer | Walk in Cooler |
| Water Cooled After Cooler | Dew Point Apparatus | Hot Air Blowing Equipment | |
| Areawise Associates | Product Profiles | Corporate Info | Exhibitions | Customers | Approvals |
|
| |
| Copyright © 2002, Mellcon Engineers Pvt Ltd.. All Rights Reserved | |